News & Events

Caleb Davis Caleb Davis

0 Course Enrolled • 0 Course Completed

Biography

Three Easy-to-Use and Compatible Formats of ActualTorrent Cisco 800-150 Practice Test

800-150 exam training allows you to pass exams in the shortest possible time. If you do not have enough time, our study material is really a good choice. In the process of your learning, our study materials can also improve your efficiency. If you don't have enough time to learn, 800-150 test guide will make the best use of your spare time, and the scattered time will add up. It is also very important to achieve the highest efficiency for each piece of debris. The professional tailored by 800-150 learning question must be very suitable for you. You will have a deeper understanding of the process. Efficient use of all the time, believe me, you will realize your dreams.

Cisco 800-150 Exam Syllabus Topics:

Topic
Details

Topic 1

Common Service Tasks and Tools: This section of the exam measures the skills of a Technical Support Engineer and focuses on tasks commonly needed to manage Cisco devices. It explains how devices boot up, introduces common Cisco IOS commands, and identifies tools for file management. It shows how to confirm physical connections, remotely access devices, and connect to the console port. It also covers how to capture the status of a device, recover passwords, and replace devices by using proper tools. Students are also taught how to find serial numbers on Cisco equipment to assist with support and maintenance activities.

Topic 2

Networking Foundations: This section of the exam measures the skills of a Network Engineer and covers the basic building blocks of computer networking. It explains different types of networks like local area networks and wireless networks, and introduces lightweight wireless LANs. It describes the layers of communication models like the OSI model and TCP
IP stack, and explains how data moves across networks. It also discusses the physical cabling used in networks, such as Ethernet and fiber optics. Students will learn about network switching, IP addressing, subnetting, and routing at Layer 3. The section also introduces Cisco’s campus network devices, data center switches, UCS servers, and collaboration devices, describing their roles and functions in the network.

Topic 3

Cisco Infrastructure and Collaboration Infrastructure: This section of the exam measures the skills of a Collaboration Engineer and focuses on Cisco infrastructure devices, endpoints, and collaboration technologies. It introduces network devices, collaboration endpoints like IP phones and video systems, and explains on-premises collaboration deployments using tools like Cisco Unified Communications Manager. It also covers how video systems integrate into collaboration environments and highlights Cisco’s cloud services for enterprise communication, including Webex Meetings, Webex Teams, and hosted collaboration solutions.

>> Latest 800-150 Test Voucher <<

ActualTorrent Cisco 800-150 Exam Real and Updated Dumps are Ready for Download

The Cisco 800-150 questions formats are PDF dumps files, desktop practice test software, and web-based practice test software. All these Cisco 800-150 questions format hold some common and unique features. Such as Cisco PDF dumps file is the PDF version of 800-150 dumps that works all operating systems and devices. Whereas the other two ActualTorrent practice test questions formats are concerned, both are the mock Cisco 800-150. Both will give you a real-time Cisco 800-150 exam preparation environment and you get experience to attempt the 800-150 preparation experience before the final exam.

Cisco Supporting Cisco Devices for Field Technicians Sample Questions (Q74-Q79):

NEW QUESTION # 74
Drag and drop the Cisco collaboration endpoints from the left onto the corresponding descriptions on the right.

Answer:

Explanation:

Explanation:
* Cisco Room Kit# All-in-one devices for personal workspaces and meeting rooms
* Cisco Desk Series# Standalone modular video conferencing systems
* Quad Camera# Multi-angle video capture for immersive experiences
* Room Navigator# Touch panel for room controls and scheduling
* Cisco Board# Interactive touchscreen displays supporting video conferencing Cisco's collaboration portfolio includes a wide variety ofhardware endpointsused toenhance remote communication and conference room experiences. These are highlighted in the FLDTEC material as follows:
* Cisco Room Kit: Combines camera, codec, speakers, and microphones into one device - designed for easy integration with displays in meeting spaces.
* Cisco Desk Series: Purpose-built for desktop video conferencing and modular setups.
* Quad Camera: Offersautomatic speaker trackingandintelligent framing, used in large rooms for immersive experiences.
* Room Navigator: Used tocontrol meetings, reserve rooms, and manage smart building functions.
* Cisco Board: Interactive digital whiteboard that integratesvideo conferencing, whiteboarding, and wireless sharing.

NEW QUESTION # 75
Which step must be performed immediately after powering off the device when replacing a Cisco chassis?

A. Remove the chassis.
B. Remove the chassis ground.
C. Label and remove all I/O cables.
D. Back up the device configuration.

Answer: C

Explanation:
After powering off a Cisco device in preparation for chassis replacement, theimmediate next stepis tolabel and remove all I/O cables. This step is crucial to ensure that all connections can be accurately restored after the new chassis is installed.
Proper labeling prevents confusion and potential misconfigurations during reassembly. Only after all cables are safely disconnected should you proceed to remove the chassis ground and then the chassis itself.
Reference:Supporting Cisco Devices for Field Technicians (FLDTEC) - Maintenance and RMA Procedures

NEW QUESTION # 76
Drag and drop the configuration tasks for restoring software from the left onto the corresponding commands on the right.

Answer:

Explanation:

Explanation:
These command associations are part of Cisco IOS essentials taught in FLDTEC's "Device Configuration and Verification" topic. Here's how each command functions:
show running-config
Displays the active configuration stored in RAM.
This command is used to verify the current settings on a Cisco device.
copy running-config startup-config
Saves the current running configuration to NVRAM, ensuring the configuration persists after a reboot.
This is critical after making changes to devicesettings.
copy tftp: running-config
Loads a configuration from a TFTP server and applies it to the current running configuration.
Often used during remote device setup or restoration.
copy usbflash0:backup.cfg running-config
Restores a saved configuration file from a USB drive.
Useful in field operations where physical backup media is used during maintenance.
These tasks are routine for field technicians performing configuration backups, restorations, and diagnostics in Cisco environments.

NEW QUESTION # 77
What is the purpose of the packages.conf file in Install mode on Cisco IOS XE Software supported switches?

A. It contains the entire bundled software image in a single file.
B. It is used to extract the bin file during the installation process.
C. It is a subdirectory in flash memory where individual software packages are stored.
D. It determines which software packages need to be loaded and in what order during boot up.

Answer: D

Explanation:
InInstall mode, thepackages.conffile plays a crucial role in the boot process of Cisco IOS XE Software. It specifies the list of software packages to be loaded and the sequence in which they should be initialized during system startup. This file ensures that all necessary components are correctly loaded, providing a modular and flexible approach to software management.
Contrary to the other options:
* Thepackages.conffile does not extract the bin file; it references already extracted packages.
* It does not contain the entire bundled image; that's characteristic of Bundle mode.
* While it resides in the flash memory, it is not a subdirectory but a configuration file.
Reference:Supporting Cisco Devices for Field Technicians (FLDTEC) - Cisco IOS Software Basics

NEW QUESTION # 78
Which layer of the OSI model provides error detection and defines how access to the media is controlled?

A. Network layer
B. Data link layer
C. Physical layer
D. Presentation layer

Answer: B

Explanation:
The Data Link Layer (Layer 2) of the OSI model is responsible for node-to-node data transfer and plays a crucial role in error detection and media access control. It ensures that data frames are transmitted to the correct device on a local network segment.
This layer is divided into two sublayers:
* Logical Link Control (LLC):Manages frame synchronization, flow control, and error checking.
* Media Access Control (MAC):Controls how devices on the network gain access to the medium and permission to transmit data.
Together, these sublayers ensure reliable data transmission by detecting and possibly correcting errors that may occur in the Physical Layer. They also manage how devices share the transmission medium, preventing collisions and ensuring orderly communication.
Reference:Supporting Cisco Devices for Field Technicians (FLDTEC) - Cisco IOS Software Basics

NEW QUESTION # 79
......

Like the Web-based Supporting Cisco Devices for Field Technicians practice exam, the Desktop 800-150 practice test software of ActualTorrent provides its valuable customers with 800-150 test questions which are very similar to the actual Supporting Cisco Devices for Field Technicians exam questions. There is no hustle. The Supporting Cisco Devices for Field Technicians 800-150 Practice Test material is updated and created after feedback from more than 90,000 professionals around the globe. A free demo of any Supporting Cisco Devices for Field Technicians exam dumps format will be provided by ActualTorrent to the one who wants to assess before purchasing.

New 800-150 Test Camp: https://www.actualtorrent.com/800-150-questions-answers.html